A faulty fire tank can make or break the emergency response during fires. Firefighters need all the help they can get, and faulty fire tanks are detrimental to the firefighting capabilities of firefighters. Aside from that, fires would not uncontrollably spread if the fire tank was able to disperse the much-needed water to deter the escalation of fire, but faulty fire tanks are most likely not able to help in the deterrence of fire.
That is why fire tank inspections are important.
How Important Are Fire Tank Inspections in Emergency Response
A fire tank inspection is an assessment of the overall structural integrity and water condition in a water storage tank used for firefighting. The main benefit of a fire tank inspection is to help ensure your water-based fire prevention and suppression system operates appropriately in cases of fire.
Fire tanks that are solely used for fire prevention usually have standing water inside the water tank. That aside, the fire tank is left at the mercy of the elements and will experience general wear and tear over time. However, if fire tanks are being utilized for other things such as a potable source of water within its service area, there is a constant need for the fire tank to be refilled to its maximum capacity so that it will have full firefighting capabilities should any fire occur.
Fire tank inspections are essential for fire tanks that are used rarely or on a regular basis. The reason for it is to keep the fire tank at its full firefighting capabilities all the time so that it will be able to prevent and suppress the spread of fire.
Being on top of fire tank inspections will minimize long-term costs by perfectly prioritizing repair and replacement plans. Many common fire tank materials are subject to corrosion, cracking, or rusting if left unattended.
Beyond the tank, fire water tank inspections are crucial for prompt emergency response. Over time, sediment can gather and collect along the bottom of tanks. If in small amounts, the deposit has no impact on the storage tank’s structural integrity or the ability to respond in an outbreak of a fire.
Areas Inspected During A Fire Tank Inspection
During a fire tank inspection, several critical components are inspected to ensure that they are in good working order. Below are some of the critical areas inspected during a fire tank inspection.
1. Tank exterior
The inspection of the tank’s exterior includes checking for cracks, dents, and corrosion. Cracks on the tank’s exterior can develop due to a variety of reasons, including changes in temperature, settlement, or even accidental damage. Dents can also occur from impact damage, such as a falling tree or other heavy objects.
2. Tank interior
The accumulation of debris and sediment inside the tank can clog the pump and other components, which can lead to reduced water flow and compromised firefighting capabilities. Therefore, it is essential to inspect and clean the tank’s interior regularly. The inspection process involves using specialized equipment to access the tank’s interior, such as underwater drones and lights, to ensure that every inch of the tank is inspected thoroughly.
3. Piping and valves
During a fire tank inspection, the piping and valves that supply water to the tank are carefully examined for any signs of damage, leaks, or other issues. The pipes are also checked for any signs of blockages, which can hinder the water flow and prevent the tank from being adequately filled. In some cases, the entire system may need to be replaced if the damage is extensive or if the components have reached the end of their useful life.
4. Water supply
During a fire tank inspection, the water supply, including the pump and any backup systems, is carefully evaluated. The pump’s electrical and mechanical components are examined to ensure that they are in good condition and that they can handle the demand for water during an emergency. The pump’s impellers and seals are also checked for wear and tear, which can cause leaks or reduce the pump’s effectiveness.
5. Electrical systems
The electrical systems that control the pump and other components of the fire tank system are inspected to ensure that they are functioning correctly. The inspector will also check the electrical wiring that connects the control panel to the pump and other components of the fire tank system. The wiring is checked for any signs of damage, including frayed or corroded wires. Any issues with the electrical systems can affect the system’s performance and must be repaired promptly.
Have your Fire Tank Inspected by Tank Inspection Sydney Today!
Keeping your firefighting services at the ready is crucial. That is why keeping up with your regular fire tank inspections is important to fight and put out fire wherever, whenever.
Have your fire tank inspected by Tank Inspection Sydney! We provide the best fire tank inspection services across Sydney and New South Wales, AU.
Need a quote? Call us directly at 1800 770 899.
Or, visit our website for more information.
You can also email us at info@tankinspections.sydney